Last month, OSHA issued an enforcement memorandum directing inspectors to scrutinize whether employers provide and maintain adequate means of exit; i.e., unlocked, unobstructed, and clearly marked exit doors and exit routes and doors that comply with 29 C.F.R. 1910 Subpart E – Means of Egress (specifically, the various requirements of 1910.36). The memo was issued in response to a deadly explosion and ammonia release at a poultry processing plant in China on June 4, 2013, in which at least 120 employees lost their lives, many because they were unable to exit the plant due to blocked or locked exits.
In the enforcement memorandum, OSHA announced that:
“During inspections of all workplaces [Compliance Safety & Health Officers] should be mindful of whether the employer has provided and maintained adequate means of egress from work areas; e.g., adequate number of exit routes are provided, exit routes are free and obstructed, and exit doors are not locked.”
This list of items for review is consistent with the criteria OSHA identified in its Emergency Exit Routes Fact Sheet. Here are the basic requirements for complying with 1910.36 set forth in OSHA’s regulations and the Fact Sheet:
- Employers must determine how many exits routes are required in its building. As a general rule, workplaces must have a minimum of two exits, and possibly more based on the number of employees, the size of the building, and the arrangement of the workplace. One exit route may be allowed if the size of the building, its occupancy, or arrangement allows all employees to evacuate safely.
- Exit routes must be maintained unobstructed, and the exit doors must remain unlocked from the inside. Specifically, exit routes must be free of stored materials, equipment, and especially explosive or highly flammable furnishings. Exits doors must be conspicuous, visible, free of decoration, and unlocked from the inside.
- Exit routes and doors must be properly labeled and maintained. Proper labels include signs that read “EXIT” or “TO EXIT” in plain legible letters, and maintained with adequate lighting. Doors or passages along the exit route that are not exits and do not lead to exits must be marked as “NOT AN EXIT” or labeled such that their non-exit purpose is obvious (e.g., store room, office, etc.).
Although the Enforcement Memorandum features the tragic anecdote about the Chinese poultry plant, OSHA’s Director of the Directorate of Enforcement specifically instructs his enforcement team to look out for egress issues in inspections at “all workplaces.”
Continue Reading OSHA To Target Exits and Exit Routes